FlagHouse is now part of School Specialty. Learn More.

Labconco Basic 47 Laboratory Hood - Fume Hood - 47 x 25 x 53 Inches

Item #: 574138
$10,549.99 $7,912.49
Free Shipping Ineligible: Details

School Specialty Shipping Policy

Items Shipped Within the Contiguous 48 United States

Free Shipping Eligible Items

  • Free shipping and handling on eligible supply orders of $49 or more. Free shipping calculation is based on the subtotals of eligible items, after any additional discounts are applied.
  • For subtotals less than $49, the shipping and handling charge is $9.95.

Free Shipping Ineligible Items

  • Shipping and handling charges are 15% of the subtotal of the items, after any discounts are applied, with a $9.95 minimum charge.

Free Shipping Ineligible Items

  • Shipping and handling charges are 15% of the subtotal of the items, after any discounts are applied, with a $99 minimum charge. If the subtotal is greater than $1,000, please e-mail freight_quote@schoolspecialty.com for a freight quote.

*Note: Individually negotiated shipping policies will override the standard shipping policy. See Full Details

Items Shipped to Hawaii, Alaska and International

See our Hawaii & Alaska Shipping Policy and International Shipping Policy for details.
Ships Directly from Manufacturer Typically Within 2-4 Weeks - Lead Times Vary
Add to Cart
Labconco Basic 47 Laboratory Hood measuring 47 in x 25 in x 53 in has an epoxy-coated steel interior and exterior for corrosion resistance to low volume chemical fumes and vapors. It has a compact size for areas with low ceilings or narrow aisles such as trailers or temporary buildings. It requires ducting from 10.13 in OD exhaust opening and features by-pass airflow, airfoil, 100 W incandescent light, internal wiring and switches. It comes with a.3 hip blower that is capable of overcoming maximum external static pressure of.25 in H2O at 720 CFM that is mounted atop the hood or remotely.
Features
  • By-pass airflow design
  • Durable glacier white powder-coated 16 gauge steel exterior and interior resists chemical exposure
  • Vertical-rising tempered safety glass sash
  • Adjustable two-piece baffle
  • Curved air foil that lifts off for cleaning
  • Removable front panel for access to electrical wiring
  • Right side fixture panel factory-prepared to accept up to three service fixtures, one electrical duplex and one airflow monitor (kits sold separately)
  • Right interior wall factory-prepared for one cupsink and turret (cupsink and turret kit sold separately)
  • Powder-coated steel 10.3” OD exhaust connection
  • ETL listed (115V models)
  • CE conformity (220V models)
  • Weight: 370 pounds
    • Required Accessories Remote Blower (except Built-In Blower Models) Ductwork Base cabinet(s) or stand Solid Epoxy Flat Work Surface