Close
Shop All:Powermatic
Powermatic 31A Belt/Disc Sander, Aluminum
Item #:
1029123
$9,787.39
$7,340.54
Ships Directly from Manufacturer Typically Within 2-4 Weeks - Lead Times Vary
Free Shipping Ineligible: Details
School Specialty Shipping Policy
Items Shipped Within the Contiguous 48 United States
Free Shipping Eligible Items
- Free shipping and handling on eligible supply orders of $69 or more. Free shipping calculation is based on the subtotals of eligible items, after any additional discounts are applied.
- For subtotals less than $69, the shipping and handling charge is $11.95.
Free Shipping Ineligible Items
- Shipping and handling charges are 20% of the subtotal of the items, after any discounts are applied, with a $11.95 minimum charge.
Free Shipping Ineligible Items
- Shipping and handling charges are 20% of the subtotal of the items, after any discounts are applied, with a $99 minimum charge. If the subtotal is greater than $1,000, please e-mail freight_quote@schoolspecialty.com for a freight quote.
*Note: Individually negotiated shipping policies will override the standard shipping policy. See Full Details
Items Shipped to Hawaii, Alaska and International
See our Hawaii & Alaska Shipping Policy and International Shipping Policy for details.
About This Item
Description
The 31A from Powermatic is cast iron construction allows both metal and woodworking to be done on the same machine. The Integral Dual Dust Port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6 x 48 inch belt sander head can be used vertically, horizontally, or angled to accommodate diverse jobs. The belt head has an indexing pin with stops at 0, 45 and 90 degrees and the head lock allows use at any angle in-between. Removing the top guard allows contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle.Features
- 7-1/2 x 13 in cast iron belt table tilts 45 deg down; 6-1/2 in x 14-1/2 in disc table with miter slot tilts 45 deg down, 15 deg up
- Comes with disc, belt and 4 in dia. dust port - minimum 400 cfm required
Shipping Type:
non parcel
Free Shipping:
false
Specifications
Product Width:
31 1/4 in W
Speed:
2,375 RPM
Product Depth:
24 in D