You may be eligible for additional discounts. Find out which purchasing cooperative or contracts are available in your state.
  • Home
  • Jet JMD-15 Prewired Milling/Drilling Machine, 38 x 37-1/2 x 42 Inches, Cast Iron
By:JET

Jet JMD-15 Prewired Milling/Drilling Machine, 38 x 37-1/2 x 42 Inches, Cast Iron

Item #: 532484
$6,793.09 $5,094.82
Free Shipping Ineligible: Details

School Specialty Shipping Policy

Items Shipped Within the Contiguous 48 United States

Free Shipping Eligible Items

  • Free shipping and handling on eligible supply orders of $49 or more. Free shipping calculation is based on the subtotals of eligible items, after any additional discounts are applied.
  • For subtotals less than $49, the shipping and handling charge is $9.95.

Free Shipping Ineligible Items

  • Shipping and handling charges are 15% of the subtotal of the items, after any discounts are applied, with a $9.95 minimum charge.

Free Shipping Ineligible Items

  • Shipping and handling charges are 15% of the subtotal of the items, after any discounts are applied, with a $99 minimum charge. If the subtotal is greater than $1,000, please e-mail freight_quote@schoolspecialty.com for a freight quote.

*Note: Individually negotiated shipping policies will override the standard shipping policy. See Full Details

Items Shipped to Hawaii, Alaska and International

See our Hawaii & Alaska Shipping Policy and International Shipping Policy for details.
Ships Directly from Manufacturer Typically Within 2-4 Weeks - Lead Times Vary
Add to Cart
Jet 15 Mill Drill with 360 head swivel incorporates a drill press angle vise, 1/2 inch drill chuck, chuck arbor with draw bar, work lamp and an adjustable carbide face mill. Features a 1/2 inch end mill capacity, 2-1/2 inch face mill capacity, 3-5/8 inch column diameter, 1 inch drilling capacity, 35-1/2 inch height, 36-1/2 inch length, 12 spindle speeds, R-8 spindle taper, 11-3/16 inch T-slot centers, 6 inch table cross travel, 14 inch table longitudinal travel with 7-1/2 x 23 inch table size, 2-1/2 inch quill, 3-1/2 inch quill travel, 9/16 inch T-slots, and has a 15 inch maximum distance from spindle to table. Measures 38 x 37-1/2 x 42 inches mill drill. The bearings support the spindle for greater tolerance and more accurate drilling depth. 1 HP, 1 PH, 115/230 V, 110 - 2580 rpm.
  • Power Source: 1 PH, 115/230 V
  • Power Rating: 1 hp
  • Speed Rating: 110 - 2580 rpm

Includes:

  • 1-Piece cast iron column with base
  • A taper for easy clean-up
  • Large hand wheel knobs
  • An extra large worktable
  • New positive quick-stop knob
  • UL listed motor
  • An easy-to-read external depth gauge
  • Heavy-duty tapered roller bearings